×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to access web GUI for cisco AP c2602e during the new setup?

Answered Question
Jul 8th, 2013
User Badges:

Fyi,  The Cisco IOS C2600 software is AP3G2-RCVK9W8-M, version 15.2(2)JB

Boot loader <AP3G2-Boot-M> loaderversion 12.4(25e) JA1

Correct Answer by Scott Fella about 4 years 1 month ago

Only autonomous AP's will there be a GUI. So you need to convert your lightweight access point to autonomous then you can use the GUI.

Sent from Cisco Technical Support iPhone App

Correct Answer by Scott Fella about 4 years 1 month ago

There is no web GUI. That ap is a lightweight access point and requires a WLC. If you want a standalone access point then you need to convert that to autonomous. You need to also be able to download the autonomous software which requires a support contract.

Here are various way to convert these AP's.


http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/u...

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/u...

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Scott Fella Mon, 07/08/2013 - 10:25
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

There is no web GUI. That ap is a lightweight access point and requires a WLC. If you want a standalone access point then you need to convert that to autonomous. You need to also be able to download the autonomous software which requires a support contract.

Here are various way to convert these AP's.


http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/u...

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/u...

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

tonylimth Mon, 07/08/2013 - 17:53
User Badges:

Hi Scott,


Thanks... So, even I have converted to autonomous, there is no way for me to access via GUI, am i right?

Correct Answer
Scott Fella Mon, 07/08/2013 - 18:27
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Only autonomous AP's will there be a GUI. So you need to convert your lightweight access point to autonomous then you can use the GUI.

Sent from Cisco Technical Support iPhone App

Amjad Abdullah Mon, 07/08/2013 - 23:17
User Badges:
  • Red, 2250 points or more

As Scott mentioned, only autonomous APs have GUI.

Make sure that HTTP/HTTPS server is enabled on the AP and try to oepn the GUI with the BVI IP address of the AP from the browser.



Rating useful replies is more useful than saying "Thank you"

Actions

This Discussion