×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Access point seamless access

Unanswered Question
Jul 9th, 2013
User Badges:

Hi,


we had configured the controller 2504 and AP

AP joini the controller as expected, but somehow user when move from one accesspoint to other they are facing issue

like getting weaker signal, not getting the signal from nearer AP.


do let us know how to resolve the issue.                  

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Daniel McDavid Tue, 07/09/2013 - 12:22
User Badges:

What code are you running? What model APs? Do you have 'Client Load Balancing' enabled under WLANS > WLAN ID > Advanced?

Scott Fella Tue, 07/09/2013 - 12:59
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

It would be bests if you posted your show run-config and also tell us which WLAN is the issue.

Sent from Cisco Technical Support iPhone App

Leo Laohoo Tue, 07/09/2013 - 19:06
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

move from one accesspoint to other they are facing issue ike getting weaker signal, not getting the signal from nearer AP.

The wireless clients decide which AP to join.  It's got nothing to do with the WLC and/or the AP.


Upgrade the wireless NIC drivers.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode