Solved: ACE Load balancing with different source IP

sansarav720e · ‎07-11-2013

Dear All ,

I am very much new to ACE . We are deploying it on our enterprise infrastructure (10.x.x.x/8) . I have a setup like this, we have 5 Proxy server which is supporting for our enteprise internet needs . Load balancing to this 5 blue coat proxy server is done via ACE module .

My customer is having special requirement based on specfic source subnet , ACE need to redirect the that specific source subnet to a particular proxy server . Is this possible in ACE ?? or we need to have separate Virtual server group for that specific source subnet range . kindly correct me if am worng on my understanding .

Thanks

Santhoshkumar Saravanan

HTH Regards Santhosh Saravanan

gaursin2 · ‎07-15-2013

Hi

I guess stsickiness is answer to your problem. Try static source base stickiness and point individual subnet to specific proxy.

View solution in original post

ajayku2 · ‎07-16-2013

Hi Saravanan,

Please refer the following link :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_2_0/configuration/slb/guide/sticky.pdf

Look at section :

IP Address Stickiness Configuration Quick Start

For example :

8. (Optional) Configure static IP address sticky entries up to a maximum of

65535 static entries per context.

host1/Admin(config-sticky-ip)# static client source 192.168.12.15

destination 172.16.27.3 rserver SERVER1 2000

The above may fulfill your requirement.

regards,

Ajay Kumar

View solution in original post

gaursin2 · ‎07-15-2013

Hi

I guess stsickiness is answer to your problem. Try static source base stickiness and point individual subnet to specific proxy.

sansarav720e · ‎07-16-2013

Dear Gaurav,

Thanks for your response , I am new to ACE can i have some sample example or document to have more understanding on this topic .Thank you ..

HTH Regards Santhosh Saravanan

ajayku2 · ‎07-16-2013

Hi Saravanan,

Please refer the following link :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_2_0/configuration/slb/guide/sticky.pdf

Look at section :

IP Address Stickiness Configuration Quick Start

For example :

8. (Optional) Configure static IP address sticky entries up to a maximum of

65535 static entries per context.

host1/Admin(config-sticky-ip)# static client source 192.168.12.15

destination 172.16.27.3 rserver SERVER1 2000

The above may fulfill your requirement.

regards,

Ajay Kumar

sansarav720e · ‎07-31-2013

Dear Ajay & Gaurav

Thanks much for your response & apprecitated .

HTH Regards Santhosh Saravanan