×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco SG300-10 VLAN help

Unanswered Question
Jul 15th, 2013
User Badges:

Hello -


We recently purchased a SG300-10 L3 switch and I need some setup help - nothing is yet configured on this device.


Our default network is 192.168.31.x (gateway 31.1), and I need to allow traffic from 192.168.5.x subnet (gateway 192.168.5.1) to pass through the network. The .5.1 gateway is a virtual interface on our firewall. We need to be able to ping the .5.x network from the .31.x network.


Can someone help me with config info? I understand changing the device from L2 to L3, but am unsure of what entires are needed from that point.


Thanks in advance!


Dan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion