×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

Answered Question
Jul 15th, 2013
User Badges:

Hello All,


New to the CUCM platform. I have CUCM 8 with MGCP controlled gateways and route patterns.


I need to POC a new SIP trunk to this environment. I have CUBE on one of my MGCP controlled gateways where the SIP to ITSP resides. I worked with Cisco and they instructed me how to add the SIP trunk and the dial peers and translations on the gateway....


The problem I am finding is how do I route calls from my already registered phones to the SIP trunk for testing ?


I do not want any calls other than the test calls I am doing to route out the sip ...Access code via a newly added SIP route pattern ?


Any replies appreciated.


Thanks,


Bill

Correct Answer by Brad Martin about 4 years 1 month ago

A specific route pattern using the SIP trunk as Gateway/Route List option. Less specific route patterns should catch everything else and route to existing mgcp gateway.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Brad Martin Mon, 07/15/2013 - 13:33
User Badges:
  • Bronze, 100 points or more

A specific route pattern using the SIP trunk as Gateway/Route List option. Less specific route patterns should catch everything else and route to existing mgcp gateway.

William Cooper Mon, 07/15/2013 - 14:05
User Badges:

Agreed, just to clarify...It does not have to be a SIP route pattern ?


IE Call Routing>

    Route/Hunt>

    RoutePattern

Actions

This Discussion