×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco acs 5.4

Answered Question
Jul 23rd, 2013
User Badges:

Hello everyone!


I would like to introduce my issue. At work we connected to acs 5.non cisco devices (zyxel, zte,Alcatel.) via tacacs+ protocol.

I tried to give them readable without privileges. I mean with attribute. But I couldn't do it. If someone knows please post to me.

If its not possible with protocol tacacs+  how I can do with radius protocol?

Correct Answer by Chris Illsley about 4 years 4 weeks ago

It's not really possible to tell you how, where TACACS hadles authentication and authorization different devices handle authorization attributes diffeently, you need to refer to the documentation for your devices to find what can and can't be done.


Thanks

Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Chris Illsley Tue, 07/23/2013 - 07:20
User Badges:
  • Bronze, 100 points or more

It's not really possible to tell you how, where TACACS hadles authentication and authorization different devices handle authorization attributes diffeently, you need to refer to the documentation for your devices to find what can and can't be done.


Thanks

Chris

Jatin Katyal Tue, 07/23/2013 - 09:55
User Badges:
  • Cisco Employee,

Hi Daryn,


Have you tried the below listed configuration for alcatel/tacacs.


alcatel-lucent.jpg

You may also refer the below listed link for

TACACS+ and RADIUS Attributes for Various Cisco and Non-Cisco Devices Configuration Example

http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bf5512.shtml#asr



~BR
Jatin Katyal

**Do rate helpful posts**

Daryn Utesbayev Tue, 07/23/2013 - 23:01
User Badges:

Hi Jatin

I haven't tried it  becouse the alcotel devices supports only radius protocol.

Thank you for helping!!!

Actions

This Discussion