×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM Warning tone for long duration calls

Answered Question
Jul 25th, 2013
User Badges:

Good afternoon everyone,

My client asked me if it is possible to set a warning tone to let users know that the call is taking too long. I know the call duration can be set up, is this related to that?


Thanks for the help in advance.


Bruno

Correct Answer by Jonathan Schulenberg about 4 years 3 weeks ago

You could do this with a TCL script on the voice gateway though. Since it already has a DSP invoked for the call that would be the easiest spot to inject audio.


http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html



Please remember to rate helpful responses and identify helpful or correct answers.

Correct Answer by Jaime Valencia about 4 years 3 weeks ago

No, CUCM doesn't have any feature like that.


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jonathan Schulenberg Fri, 07/26/2013 - 04:34
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

You could do this with a TCL script on the voice gateway though. Since it already has a DSP invoked for the call that would be the easiest spot to inject audio.


http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html



Please remember to rate helpful responses and identify helpful or correct answers.

Bruno Mauricio ... Wed, 08/07/2013 - 08:34
User Badges:

Thanks for the help Jonathan. It helps a lot.

Sent from Cisco Technical Support iPhone App

Actions

This Discussion

Related Content