×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ASR 903 packet drop issue

Unanswered Question
Jul 29th, 2013
User Badges:

Hi experts,

     I have an issue with Cisco ASR 903 router, which is generating logs as below.


IST: %IOSXE_INFRA-5-PUNT_SVC_INVALID_OPT_PKT: Invalid IPv4 options packet punted to RP


I am seeing packet drop on one interface. Please let me know how I can identify the logs above were generating due to this packet drop.


I tried to run "debug netdr" but command not taking. Is there any method to run netdr capture?

Please suggest.


GigabitEthernetX/X/X  is up, line protocol is up

  Hardware is A900-IMA8S, address is 1833.9d3c.cd97 (bia 1833.9d3c.cd97)

  Description: ### connected to the 4948-2_PORT-48 ###

  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,

     reliability 255/255, txload 113/255, rxload 18/255

  Encapsulation ARPA, loopback not set

  Keepalive set (10 sec)

  Full Duplex, 1000Mbps, link type is auto, media type is SX

  output flow-control is off, input flow-control is off

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:51, output never, output hang never

  Last clearing of "show interface" counters 00:00:45

  Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 297


------------------ show version ------------------



Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.2(4)S2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 18:07 by mcpre


IOS XE Version: 03.07.02.S



Br,

Naveen Paveri

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion