×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

iPhone issue, Jabber works again by change name/reset in CUCM

Unanswered Question
Jul 31st, 2013
User Badges:

Hi all,


I just want to know, if there is some well know issue on the jabber for iPhone 4/5.

I have some clients running on the phones, but after 2-3 weeks, those jabber just go to "unregistered" status, the app is closed and open again, the phone is restarted and those things (basic troubleshooting). but nothing works until I go to CUCM and then just change one letter of the device name, then change it back to original name + reset, and the Jabber is registered again.


This fix is ridiculous, I don’t want to naming/reset every device when it cannot be connected using the corporate network.


Someone has found the solution for this?

Please Take a look to my SIP profile for jabbers.

58. 0076 SIP Precondition.png


Reggards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion