×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ARP TIMEOUT

Answered Question
Aug 8th, 2013
User Badges:

How do you show the current arp timeout on router.  I have a 3825 and a 2811.


Thanks in advace.


Alfred                  

Correct Answer by John Blakley about 4 years 1 week ago

Arp timeout can be found per interface when you do a "show int | i ARP"


Router(config)#do sh int fa0/1 | i ARP

  ARP type: ARPA, ARP Timeout 04:00:00



You can change it per interface with the "arp timeout " command on the interface. Default is 4 hours...


HTH,
John

*** Please rate all useful posts ***

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
John Blakley Thu, 08/08/2013 - 11:40
User Badges:
  • Purple, 4500 points or more

Arp timeout can be found per interface when you do a "show int | i ARP"


Router(config)#do sh int fa0/1 | i ARP

  ARP type: ARPA, ARP Timeout 04:00:00



You can change it per interface with the "arp timeout " command on the interface. Default is 4 hours...


HTH,
John

*** Please rate all useful posts ***

Actions

This Discussion