×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Presence server IMP: cannot change the default 'domain.not.set' presence domain

Unanswered Question
Aug 11th, 2013
User Badges:

Dear all,

I try to change the default value of the IM and Presence Domain in the IMP server (cluster topology/settings) from the default "domain.not.set" to the correct value.

However, it seems I cannot change this field in any way (backspace not working in this field). I also deactivated all services, rebooted the server to see if that would help, but it wasn't the case.

The setup is a HA setup, with 2 nodes in a cluster pair. I also tried it by also removing the second node and the high availability, but still the field can not be edited.

Does anyone have an idea what I need to do to be able to change this field ? The 3 services that should be stoppped as per documentation are of course deactivated - as well as all the other services


the release is  9.1.1


kind regards,

juan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Mon, 08/12/2013 - 06:32
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Did you stop the services it tells you below ,i.e. presence, proxy, etc?  Do not deactivate them, just make sure they are stopped.


HTH,


Chris

Actions

This Discussion