×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

1751 Router Hang after upgrade IOS

Unanswered Question
Aug 13th, 2013
User Badges:

Dear Friend,


plz help me i have upgrade IOS on cisco 1751

upgradet version c1700-k9sv8y7-mz.122-15.T14.bin

but problem with Router is hang and Router is Stop on below menstion step kinldy help me


Router#copy tftp flash:

Address or name of remote host [172.16.10.220]?

Source filename [c1700-k9sv8y7-mz.122-15.T14.bin]?

Destination filename [c1700-k9sv8y7-mz.122-15.T14.bin]?

Accessing tftp://172.16.10.220/c1700-k9sv8y7-mz.122-15.T14.bin...

Erase flash: before copying? [confirm]

Erasing the flash filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of flash: complete

Loading c1700-k9sv8y7-mz.122-15.T14.bin from 172.16.10.220 (via FastEthernet0):

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!

[OK - 13162668 bytes]



Verifying checksum...  OK (0xE7EE)

13162668 bytes copied in 161.580 secs (81462 bytes/sec)

Router#relo

Router#reload



System configuration has been modified. Save? [yes/no]: y

Building configuration...

[OK]

Proceed with reload? [confirm]



*Mar  1 18:37:26.391: %SYS-5-RELOAD: Reload requested by console. Reload Reason:

Reload Command.

System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support

Copyright (c) 2001 by cisco Systems, Inc.

C1700 platform with 32768 Kbytes of main memory



program load complete, entry point: 0x80008000, size: 0xc8d7b8



Error : memory requirements exceed available memory

Memory required     : 0x021A7F7C



*** System received a Software forced crash ***

signal= 0x17, code= 0x4, context= 0x0

PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd



*** Machine Check Exception ***

PC = 0xfff16784, Vector = 0x200, SP = 0x81fffe28

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 08/13/2013 - 02:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Error : memory requirements exceed available memory

You're trying to load an IOS which your DRAM can't accomodate.


Look for another IOS version which will fit your appliance's DRAM and memory.

afroz khan Tue, 08/13/2013 - 02:45
User Badges:

but i am not able to give any commond on router becoz Router is hang on


*** Machine Check Exception ***

PC = 0xfff16784, Vector = 0x200, SP = 0x81fffe28


this step

cadet alain Tue, 08/13/2013 - 02:45
User Badges:
  • Purple, 4500 points or more

Hi,

The new IOS needs more RAM to be decompressed, you need 96 MB of RAM for this image.


Regards


Alain



Don't forget to rate helpful posts.

afroz khan Tue, 08/13/2013 - 02:48
User Badges:

how can re intall IOS if the router hang on


*** Machine Check Exception ***

PC = 0xfff16784, Vector = 0x200, SP = 0x81fffe28



and Router is not going Rommon mode amd # mode

cadet alain Tue, 08/13/2013 - 02:58
User Badges:
  • Purple, 4500 points or more

Hi,

power cycle then go to ROMMON  and use tftpdnld to install a valid image.


Regards


alain



Don't forget to rate helpful posts.

afroz khan Tue, 08/13/2013 - 04:09
User Badges:

i have use Ctrl-Break key for the go rommon  mode but its not working

afroz khan Tue, 08/13/2013 - 04:13
User Badges:

i have use Ctrl-Break key for the go rommon  mode but its not working

cadet alain Tue, 08/13/2013 - 04:17
User Badges:
  • Purple, 4500 points or more

Hi,

have you shut it down then unshut( power cycle)  ? before using the ctrl-break ?


Regards


Alain



Don't forget to rate helpful posts.

Actions

This Discussion