I did but Still does not working. Here my configuration:
sh run
Building configuration...
Current configuration : 2839 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$XyIP$zv.VE6.tqUKd3WwULNa.r1
!
ip subnet-zero
ip dhcp excluded-address 195.101.60.1 195.101.60.12
!
ip dhcp pool 0
domain-name global.com
default-router 195.101.60.2
lease 1 5 36
!
!
no aaa new-model
!
dot11 ssid CISCO_AP
vlan 10
authentication open
guest-mode
!
power inline negotiation prestandard source
!
!
username Cisco password 7 032752180500
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid CISCO_AP
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
packet retries 128
station-role root access-point
rts retries 32
beacon dtim-period 100
no dot11 extension aironet
world-mode dot11d country MX both
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
ssid CISCO_AP
!
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
packet retries 32
fragment-threshold 2338
station-role root
rts threshold 2338
rts retries 32
beacon dtim-period 100
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
no bridge-group 10 source-learning
bridge-group 10 spanning-disabled
!
interface BVI1
ip address 195.101.60.12 255.255.255.224
no ip route-cache
!
ip default-gateway 195.101.60.2
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
!
end
ap#
Espero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"
**Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
