08-21-2013 05:44 AM - edited 03-16-2019 06:58 PM
Hi Support,
I have installed CUCM/CUC 6000 (UCS C200 M2) Exsi.4.1.0 i use ova taplates for both now i need to install the .lic which MAC should i chose i didnt understand do i have to configure manually this is the network output for CUCM what if i reinstall these MAC will remain same???
DHCP | disabled |
Status | Up |
IP Address | 10.10.5.5 |
IP Mask | 255.255.255.000 |
Link Detected | yes |
Queue Length | 1000 |
MTU | 1500 |
MAC Address | 00:0c:29:5c:f8:7e |
License MAC | 6a3cacbd1a51 |
RX Bytes | 356175 |
RX Packets | 2637 |
RX Errors | 0 |
RX Dropped | 0 |
RX Overrun | 0 |
RX Multicast | 0 |
TX Bytes | 2445227 |
TX Packets | 1088 |
TX Errors | 0 |
TX Dropped | 0 |
TX Carrier | 0 |
TX Collisoins | 0 |
=========================================================================================
For Unity Connection
DHCP | disabled |
Status | Up |
IP Address | 10.10.5.6 |
IP Mask | 255.255.255.000 |
Link Detected | yes |
Queue Length | 1000 |
MTU | 1500 |
MAC Address | 00:0c:29:9c:04:07 |
License MAC | 0a849e42d4e7 |
RX Bytes | 277824 |
RX Packets | 2636 |
RX Errors | 0 |
RX Dropped | 0 |
RX Overrun | 0 |
RX Multicast | 0 |
TX Bytes | 1594214 |
TX Packets | 878 |
TX Errors | 0 |
TX Dropped | 0 |
TX Carrier | 0 |
TX Collisoins | 0 |
Regards
Sheraz
Solved! Go to Solution.
08-21-2013 09:47 AM
Then you use the respective license MAC to license each system
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-21-2013 09:49 AM
Use the License MAC 6a3cacbd1a51 for all licensing with this version, once you go to version 9+ it becomes irrelevant due to ELM implementation.
HTH,
Chris
08-21-2013 10:15 AM
1. See this thread:
https://supportforums.cisco.com/thread/2177324
2. this is OVA for provisioning manager, if you want to install and use it this the OVA template for it.
HTH, please rate all useful posts!
Chris
08-21-2013 06:22 AM
What versions are you using???
It all depends upon that fact, and you're not mentioning it.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-21-2013 09:34 AM
Hi Sir,
Thanks for quick reply we ordered all the lic for 6K CUCM/CUC are installed up and running EXSi version 4.1 vSphare 4.1 registered version (UCS C200 M2 rack mount server )
CUCM 8.6.2a
CUC 8.6.2a
Regards ,
Sheraz
08-21-2013 09:47 AM
Then you use the respective license MAC to license each system
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-21-2013 09:49 AM
Use the License MAC 6a3cacbd1a51 for all licensing with this version, once you go to version 9+ it becomes irrelevant due to ELM implementation.
HTH,
Chris
08-21-2013 10:12 AM
Hello Sir ,
First of all thanks you very much for help okay i will use CUCM License MAC for CUCM and Unity License MAC for CUC.
I have only 2 questions now your help will be appreciated.
1) If something happend or crash software and i need to reinstall the CUCM and CUC on same server from scratch the LIC MAC will change or remain same for both product CUCM/CUC 8.6.2a or i can backup and restore? .
2) what is this file for (cupm_8_6_linux_vmware.ova) i received with the bundle i need to install this or its okay to contnue because i install this and its asking for username and password.
Please correct me.
Thanks In Advance
Sheraz
08-21-2013 10:15 AM
1. See this thread:
https://supportforums.cisco.com/thread/2177324
2. this is OVA for provisioning manager, if you want to install and use it this the OVA template for it.
HTH, please rate all useful posts!
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: