ASA 5512-X no int vlan command!?

Unanswered Question
Aug 23rd, 2013
User Badges:

I don't have much experience yet with ASAs but I thought the int vlan command should be available? It's an ASA 5512-X with IOS 8.6(1)2, should I upgrade to the newest 9 version? Also, there are rj45 interfaces and SFP interfaces which are numbered Gi0/0 -5 and Gi1/0 - 5, how do I tell what numbers correspond to what interfaces?  Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Marvin Rhoads Fri, 08/23/2013 - 20:30
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 Firewalling, Network Management, VPN

"int vlan" is specific to the 5505 which has an integrated switch. The 5510 and higher use a subinterface and vlan command within the subinterface config mode. See the configuration guide section here:

Rear panel ports are numbersed as described in the hardware installation guide here:

I don't have one in front of me but seem to recall they also have printed designations on the physical unit if you look closely.


This Discussion