×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ISE default settings for "ISE - Process Status"

Unanswered Question
Sep 2nd, 2013
User Badges:

Please put default settings for alerts "ISE - Process Status" for CiscoISE (PAN / Operations / Alarms / Rules / Criteria / Monitor Processes).

For example, for version 1.1.4.218 for virtual machines.


Thanks in advance!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Andrey.Gulenko Tue, 09/03/2013 - 02:33
User Badges:

Hello Ravi!


Thank you for your answer!


I have studied this document before. Problem is that this rule comes a lot of alerts (every 2 minutes, all 6 exist nodas). Maybe it really is a error, but maybe it's just redundant messages, which set up the previous system administrator.


In an attachment - a screenshot of the messages (which arrive every 2 minutes), and a screenshot of current settings of criteria alerts - that was my question (which must be marked/cheked with checkboxes?)

Muhammad Munir Tue, 09/03/2013 - 01:03
User Badges:
  • Cisco Employee,

Hi


You can view process status for the network from the Cisco ISE dashboard using the System Summary dashlet. For example, when processes like the application server or database fail, an alarm is generated and you can view the results using the System Summary dashlet.


One of the requirements for creating an alarm rule is that you assign it to a schedule. The following task shows you how to create an alarm rule, and then assign it to a schedule.


The following default alarm rules are shown in the user interface:

ISE - AAA Health

ISE - Process Status

ISE - System Errors

ISE - System Health


You can create these alarm rules using the following procedure:

Passed Authentication

Failed Authentication

Authentication Inactivity

Authenticated But No Accounting Start

Unknown NAD

External DB Unavailable

RBACL Drops


For more information about configuration etc please go through this link:

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_ug.pdf

at page no.928

Andrey.Gulenko Tue, 09/03/2013 - 02:38
User Badges:

Hello Muhammad!


Thank you for your answer!


The problem I described in my post above.

If you have default settings for the criteria - put a screenshot here.


Thanks in advance!

Andrey.Gulenko Wed, 09/04/2013 - 04:06
User Badges:

Hello!


Thank you for your answer!


I'm interested in (screenshot) default settings for alerts "ISE - Process Status" for CiscoISE (PAN / Operations / Alarms / Rules / Criteria / Monitor Processes).

Actions

This Discussion

Related Content