Hi,no. Only one interface configured on the primary instance.

Can you please provide me management level debugs:

Here are the steps:

acs/acsadmin# acs-config

Escape character is CNTL/D.

Username: xxxx ( GUI ADMIN USERNAME)

Password: xxxx ( GUI ADMIN PASSWORD)

acs/acsadmin(config-acs)# debug-log mgmt level debug

Exit

Attempt to register the secondary server again.

Show acs-logs filename ACSManagement.log

Note: Once you collect the above fine. Turn off the mgmt logs with this command

           debug-log mgmt level warn

Save complete output of the ACSManagement.log in a text file and attach to your next post when possible.

~BR
Jatin Katyal

**Do rate helpful posts**

Hi, as attached. This is the timeframe I trying to register as primary instance.

Is there a firewall between the two ACS appliances? Also are you able to resolve dns in both directions, primary to secondary and secondary to primary?

Tarik Admani
*Please rate helpful posts*

Hi,

Was this issue resolved?

I am experiencing the same problem