×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to configuration Cisco switch connect dhcp server?

Answered Question
Sep 15th, 2013
User Badges:

I have one DHCP server connect to the cisco switch. Port # 47 connect to DHCP server. Port # 48 connect to Dsl modem, Port # 1 to Port # 46 this ports for employees



How to configuration  the switch ?


find  below photo




qw.png

Correct Answer by Carlo Poggiarelli about 3 years 11 months ago

Hi.
All pc should be also in the same VLAN of DHCP server.

HTH
Regards
Carlo

Sent from Cisco Technical Support iPhone App

Correct Answer by Reza Sharifi about 3 years 11 months ago

If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).


HTH

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Reza Sharifi Sun, 09/15/2013 - 08:03
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).


HTH

Correct Answer
Carlo Poggiarelli Sun, 09/15/2013 - 10:05
User Badges:
  • Green, 3000 points or more

Hi.
All pc should be also in the same VLAN of DHCP server.

HTH
Regards
Carlo

Sent from Cisco Technical Support iPhone App

Actions

This Discussion