09-16-2013 11:49 PM - edited 03-03-2019 07:10 AM
Hi Guys,
I am using a 2509 as my access server. It 2 Serials, aui, and a console port. I have 5 static IPs and i am trying to assign 1 to this router so I cann access this from outside my home.
But, my Comcast modem (Or my Linksys Router) has RJ-45 connector.
How do I connect this to the internet? Is there an adapter for the Serial (not the smart serials, see pic) to RJ-45?
Thanks in advance!
Robin
09-17-2013 04:38 AM
You could try something like this:
HTH,
John
*** Please rate all useful posts ***
09-17-2013 07:08 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If I remember correctly, there's a converter module to allow the AUI to work with 10baseT (half duplex only).
09-17-2013 05:26 PM
That router is very, very old and does not have not even close to the perfomances needed for today broadband.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: