×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Configuring TNT in IOS Voice Gateway

Unanswered Question
Sep 25th, 2013
User Badges:

                   Hello all


1. Is TNT, Take Back And Transfer, supported in IOS voice gateway in general?


2. If yes, is there any specific IOS configuration needed at the voice gateway?


(I do not see any need as the DTMF digits(-tones) will be sent in-band as in normal voice stream to the PSTN (which supported/subscribe to TNT).


Please advise. thanks


Paul

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Thu, 09/26/2013 - 08:57
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

No need to configure anything for TNT as the transfer DTMF sequence is sent inband.


Chris

Actions

This Discussion