×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

LMS Prime 4.2.2 Device Configuration Change Report

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
AFROJ AHMAD Mon, 09/30/2013 - 19:41
User Badges:
  • Cisco Employee,

Hi Ray ,


You can use the feature called Change Audit to achive your Goal:


Change Audit clients are RME applications that  record change  information. Applications, such as Software Management,  send messages to  Change Audit when they make a change to the network,  for example,  uploading a new Cisco IOS image.


For more information , you can check the below link:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.2/user/guide/chgaud.html#wp1031857


http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.2/user/guide/chgaud.html#wp1034685


You can also create AUTOMATED Action bases on SYSLOGS to track or email the chnages to you :

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.2/user/guide/syslog.html#wp1211314



Thanks-

Afroz

[Do rate the useful post]

Actions

This Discussion

Related Content