×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

S660 proxy takes a path to MPLS

Unanswered Question
Oct 6th, 2013
User Badges:

Hi,

I was just wondering if a proxy could be deployed in such a way that the egress traffic from it would take an MPLS path as opposed to the Internet.


Thanks.


_Greg                  

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Vance Kwan Sun, 10/06/2013 - 23:42
User Badges:
  • Cisco Employee,

Hi Greg,


I'm not familiar with MPLS, but the WSA does not have anything special to accomodate MPLS setups.  I do not believe it needs it.  You can setup static routes for the egress traffic to use a separate interface if that is what you are asking.  As long as it has layer 3 connectivity, it really does not care what the upstream does.

Actions

This Discussion