cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
386
Views
0
Helpful
4
Replies

Connecting 2 Bldgs some half mile apart:::

Rob Johnson
Cisco Employee
Cisco Employee

Two Autonomous Access Points connecting 2-Bldgs some 1/2 mile apart:::

Root-Bridge to WGB?

Root-Bridge to Non Root Bridge?

What's the best way to set this up?

2 Accepted Solutions

Accepted Solutions

Here are some of the config examples which I tested. This may be also useful to you as well.

1. WGB config example

http://mrncciew.com/2013/07/02/wgb-config-example/

2. IOS AP - WGB with Multiple VLAN

http://mrncciew.com/2013/06/16/ios-ap-wgb-with-multiple-vlan/

3. Unified AP - WGB with multiple VLAN

http://mrncciew.com/2013/06/16/unified-ap-wgb-with-multiple-vlan/

4. Autonomos AP- Wireless Bridges

http://mrncciew.com/2013/01/13/autonoumous-ap-wireless-bridges/

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

4 Replies 4

thanks leo!

Thanks for the ratings, Rob. 

Here are some of the config examples which I tested. This may be also useful to you as well.

1. WGB config example

http://mrncciew.com/2013/07/02/wgb-config-example/

2. IOS AP - WGB with Multiple VLAN

http://mrncciew.com/2013/06/16/ios-ap-wgb-with-multiple-vlan/

3. Unified AP - WGB with multiple VLAN

http://mrncciew.com/2013/06/16/unified-ap-wgb-with-multiple-vlan/

4. Autonomos AP- Wireless Bridges

http://mrncciew.com/2013/01/13/autonoumous-ap-wireless-bridges/

HTH

Rasika

**** Pls rate all useful responses ****

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: