×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

snmp config with community name in wlc

Unanswered Question
Oct 15th, 2013
User Badges:

                   Hi,


I am having wlc 2504 with S/w version

Software Version7.2.111.3


I want to add community name uner "snmp v1/v2c"

My requirement is : my community name will be the same but Ip/subnet will have 3 range & which I need to put

But I am only able to put one


Pls share workaround & also suggest any S/w upgrade is require for the same or not


Br/Subhojit

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 10/15/2013 - 21:39
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Disable SNMPv1.  Too many vulnerabilities to consider.

subhojithalder198 Tue, 10/15/2013 - 21:42
User Badges:

Hi,


I have to use snmp v2c option as our nms is only supporting v2c.

Pls suggest


Br/Subhojit

Rasika Nayanajith Wed, 10/16/2013 - 00:19
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

You can enter ONE ip subnet when configuring this. Therefore you have to choose the summary address to cover all of your NMS systems. If you cannot summarize this easily then you have to use default 0.0.0.0 to cover everything.


CLI sysntax is like below.


(WLC) >config snmp community ipaddr


It will look like this


(WLC) >config snmp community ipaddr 0.0.0.0 0.0.0.0


Anyway let us know three NMS range to see how cat it be summarized.


HTH

Rasika


**** Pls rate all useful responses ****

Actions

This Discussion