×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Chris Deren Fri, 10/18/2013 - 08:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

This has been asked many times here and you should be able to search for options. Basically there are 2:

if using H323/SIP for GW control use translation-rule reject on the GW

Or use "Route Next Hop By Calling Party Number" feature on CUCM translation pattern if you have CUCM 8+ (I think).


HTH,


Chris

Martin Gottfried Sun, 10/20/2013 - 12:18
User Badges:

Hi Jeff,


you can also use the ECC (External Call Control) to achive your needs.

For this, you have to have some external app which will handle it.


2Ring PHONE SERVICES (http://www.2ring.com/NewJuice) may be the one what you look for.

By the way, FREE or TRIAL license is obviously available.


Regards,

Martin

Actions

This Discussion