10-21-2013 12:33 PM - edited 03-07-2019 04:09 PM
Hello,
Can anyone recommend a safe, general purpose logging buffer size for a 6509? There seems to be a lot of discussions around this topic but I haven't found anything 'official' regarding a best practice for this. I would like to use 128000 and don't really see any issues with that but I am just curious if anyone has knowledge of any Cisco approved configuration. I do realize that this number is dependent upon the switch configuration, so I am just looking for some general guidelines at this point.
Thanks,
10-21-2013 02:12 PM
Depends a great deal on what you're logging and what freqency messages occur, but I've always felt 128K or 256K were good, reasonable numbers.
I posted a blog article about it here - http://wrerase.blogspot.com/
10-21-2013 02:23 PM
Thanks for the feedback and that blog is very helpful. I would agree that logging is often overlooked until it is needed during an outage I am trying to standardize my logging confogurations and 128k (131072 bytes) looks like a good place to start...
10-21-2013 02:23 PM
128k or 256k is OK.
You also may want to try using a logging server.
10-22-2013 06:32 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Consider "best practice" whatever size you need as long as it doesn't take so much RAM it's adverse to normal device operation. (Default values are from when device RAM used to be counted in K.)
In current generation devices, I find 64KB usually meets both objectives, but 128KB is likely to be fine too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide