HUNTING CONFIG HELP!!

Unanswered Question
Oct 22nd, 2013
User Badges:

Hi all,


                  

We want to configure MD’s phone in such way that when external calls came on MD’s number it will first land to his secretary then by another secretary & then by floor operator.

Could you please help us to full fill above requirement.


I tried hunting but I do not want to make the MD's number as pilot  number as he do not want any call to be landed on his ip phone

how to fix this its urgent


Regards,


Alex

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
islam.kamal Wed, 10/23/2013 - 01:47
User Badges:
  • Red, 2250 points or more

Hi


You can use one of the below

ephone-dn  1  dual-line

number 5000

label XXXX

name XXXX

call-forward all 5060

huntstop channel

hold-alert 30 originator



ephone-dn  2  dual-line

number 5060

label XXXX

name XXXX

call-forward busy 5061

call-forward noan 5061  timeout 24

huntstop channel

hold-alert 30 originator


ephone-dn 3  dual-line

number 5062

label XXXX

name XXXX

call-forward busy 5063

call-forward noan 5063  timeout 24

huntstop channel

hold-alert 30 originator



ephone-dn 4  dual-line

number 5063

label XXXX

name XXXX

call-forward busy 5064

call-forward noan 5064  timeout 24

huntstop channel

hold-alert 30 originator



Thank you

Please rate all useful infromation

Suresh Subramanian Wed, 10/23/2013 - 06:44
User Badges:
  • Gold, 750 points or more
  • Community Spotlight Award,

    Mobile User, October 2015

Hi, Please try this, if it is cucm.




- create MD's extn in Restricted Partition and again the same number with Unrestricted partition.


- create the hunt pilot number with MD's extn with Unrestricted partition and add the secretary and operator phones into the hunt group


- assign the restricted partition to the secretarys and floor operator's phones, so that they can transfer the call to MD's phone.

Actions

This Discussion