×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Block internal calls on CME

Answered Question
Oct 23rd, 2013
User Badges:

Is there anyway to block internal calls on CME?


For example, phone 1000 no call to phone 1001 in same Router.

Correct Answer by islam.kamal about 3 years 10 months ago

Hi


Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.


Thank you

Please rate all useful information

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.8 (3 ratings)
Loading.
islam.kamal Wed, 10/23/2013 - 07:11
User Badges:
  • Red, 2250 points or more

Hi


I have configured below some solutions , i hope all help you:-


1-

voice translation-rule 1

rule 1 reject /1000/


voice translation-profile REJECT

translate calling 1


Then go to the ephone-dn (which has number 1001) . The below configuration based on your IOS.

ephone-dn  50

     number 1001

     translation-profile incoming REJECT

or


ephone-dn  50

     number 1001

     translate calling REJECT



2-

telephony-serv

  after-hours block pattern 1 1000  7-24


Then under ephone with DN other than 1001 configure  after-hours exempt CLI.This will block only 1001 , when you enable after-hours exempt under other phones this will allow other phones calls 1000.



Thank you

Please rate all useful informaion

Correct Answer
islam.kamal Wed, 10/23/2013 - 11:00
User Badges:
  • Red, 2250 points or more

Hi


Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.


Thank you

Please rate all useful information

Actions

This Discussion