Solved: Block internal calls on CME

Darby S. Silva · ‎10-23-2013

Is there anyway to block internal calls on CME?

For example, phone 1000 no call to phone 1001 in same Router.

islam.kamal · ‎10-23-2013

Hi

Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.

Thank you

Please rate all useful information

View solution in original post

islam.kamal · ‎10-23-2013

Hi

You can do it by using COR , Please find the below link:-

http://www.cisco.com/image/gif/paws/42720/configuring-cor.pdf

http://www.hh.se/download/18.70cf2e49129168da015800092952/4_11_Class_of_Restriction.pdf

Thank you

Please rate all useful information

islam.kamal · ‎10-23-2013

Hi

I have configured below some solutions , i hope all help you:-

1-

voice translation-rule 1

rule 1 reject /1000/

voice translation-profile REJECT

translate calling 1

Then go to the ephone-dn (which has number 1001) . The below configuration based on your IOS.

ephone-dn 50

number 1001

translation-profile incoming REJECT

or

ephone-dn 50

number 1001

translate calling REJECT

2-

telephony-serv

after-hours block pattern 1 1000 7-24

Then under ephone with DN other than 1001 configure after-hours exempt CLI.This will block only 1001 , when you enable after-hours exempt under other phones this will allow other phones calls 1000.

Thank you

Please rate all useful informaion

Darby S. Silva · ‎10-23-2013

Hi Islam,

Some solutions with COR ?

Thanks.

islam.kamal · ‎10-23-2013

Hi

Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.

Thank you

Please rate all useful information

Darby S. Silva · ‎10-24-2013

Islam

Thanks