×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

NEED EXAMPLE AD INTEGRATION CONFIGURATION ON ACS 3.3, 5.3

Answered Question
Oct 23rd, 2013
User Badges:

Hi,


Please give example of Active directory configuration related to radius in Windows server 2003.


The same way need Step by step to AD configuration in ACS.


Please help on this. I searched alot but not getting any exact docs which say both of these things.


I need to configure End User (Wireless or L3 Device) --> ACS --> LDAP for Authentication


Regards,

Sakthivel

Correct Answer by Anonymous about 3 years 10 months ago

Before you integrate ACS 5.x to the AD, ensure that the TimeZone, Date & Time on the ACS matches with that on the AD primary domain controller. Also, define the DNS server on the ACS in order to be able to resolve the domain name from the ACS 5.x. Complete these steps in order to configure ACS 5.x Application Deployment Engine (ADE-OS):


Please follow the below link for step by step configurations because it's not possible to paste here full steps:


http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bc6506.shtml

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
aqjaved Wed, 10/23/2013 - 07:37
User Badges:
  • Bronze, 100 points or more

Before you integrate ACS 5.x to the AD, ensure that the TimeZone, Date & Time on the ACS matches with that on the AD primary domain controller. Also, define the DNS server on the ACS in order to be able to resolve the domain name from the ACS 5.x. Complete these steps in order to configure ACS 5.x Application Deployment Engine (ADE-OS):


Please follow the below link for step by step configurations because it's not possible to paste here full steps:


http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bc6506.shtml

Ravi Singh Thu, 10/24/2013 - 14:26
User Badges:
  • Cisco Employee,

I do agree with Aqeel. Please follow the link given by aqeel.

Sakthi vel Thu, 10/24/2013 - 22:43
User Badges:

Dear Aqeel,


kindly provide the link for ACS 3.3 or 4 integration with AD. Since we have both ACS 5.3 (VM) & 3.3 (Windows) of the setup and need to understand this


Regards,

Sakthivel M

Sakthi vel Fri, 10/25/2013 - 00:43
User Badges:

I followed the steps.. But while giving test connection


getting following error


Error while configuring Active Directory:Error while configuring Active Directory:No writable domain controllers found. due to unexpected configuration or network error.Please try the --verbose option or run 'adinfo --diag' to diagnose the problem.Join to domain 'mims.com', zone 'null' failed


Help on this

Attachment: 
Sakthi vel Fri, 10/25/2013 - 00:46
User Badges:

ACS timezone and AD time and zone are same

it is configured with NTP

Actions

This Discussion