×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

WS -SVC -FWM -1

Unanswered Question
Oct 23rd, 2013
User Badges:

I have a problem with the card Hardware: WS -SVC -FWM -1



Currently has the version



FWSM Firewall Version 2.3 (4 )



FWSM Device Manager Version 4.1 (5 )



The problem is that I can not enable the interfaces



Interface eobc " eobc " , is up , line protocol is up



MAC address 0000.1100.0000 , MTU 1500



127.0.0.11 IP address , subnet mask 255.255.255.0



Received 1267 packets , 85666 bytes



Transmitted 2932 packets , 123535 bytes



Dropped 0 packets



< --- More --- >


Control Point Interface States :



Interface number is 0



Interface config status is active



Interface state is active



Control Point States :



Interface vlan config status is not active



Interface vlan state is DOWN



Vlan8 Interface " " , is administratively down , line protocol is up



Available but not configured via nameif



Vlan9 Interface " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface Vlan11 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan12 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan13 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan14 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan15 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan16 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan17 " " , is administratively down , line protocol is up



< --- More --- >


Available but not configured via nameif



Interface vlan18 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan19 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface VLAN20 " " , is administratively down , line protocol is up



Available but not configured via nameif



Interface vlan24 " " , is administratively down , line protocol is up



Available but not configured via nameif






Can anyone tell me how I can update it since the pictures went up to the switch,

I think that's why I can not enable the interfaces


I hope I can help.


regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
iec1128759 Mon, 10/28/2013 - 09:36
User Badges:

FWSM#

FWSM#

FWSM# copy tftp://100.100.100.1/c6svc-fwm-k9.3-1-5.bin flash:image

copying tftp://100.100.100.1/c6svc-fwm-k9.3-1-5.bin to flash:image

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Received 5865984 bytes.

imgsum_config: sumval(0x9c65) md5(0xe682806c 0xcc464766 0xaf0a1317 0x40b5ed11)

imgsum_verify: chksum(0x   0) md5(0x0c127e10 0x17221e4c 0xe981d516 0x18cc85f7)

Checksum verification on new image failed.

Image not installed.

FWSM#

rfalconer.sffcu Mon, 10/28/2013 - 10:56
User Badges:
  • Bronze, 100 points or more

You have to assign a nameif to each of the vlan interfaces for them to be enabled. Just like the inside and outside, you need to put the nameif on each one.

Actions

This Discussion