×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CME Version 8.6 and cisco jabber

Answered Question
Oct 25th, 2013
User Badges:

Hi



We have a cme version 8.6 and we are wondering if we can configure a cisco jabber into our mobile phones

We have android platforms and iphone



Thank you                  

Correct Answer by Carlo Poggiarelli about 3 years 9 months ago

Hi.

Iphone is the only mobile phone supported by UC5XX because of the release of CME they run.

https://supportforums.cisco.com/docs/DOC-9827


CiscoMobile-iOS is the right device type



HTH


Regards


Carlo






Please rate all helpful posts

"The more you help the more you learn"

Correct Answer by islam.kamal about 3 years 9 months ago

Hi


In addition to the professional configuration of Mr/Carlo , Please also find the below document which shows you that V8.6 support jabber + required configuration.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1063949


Thank you

Please rate all useful information

Correct Answer by Carlo Poggiarelli about 3 years 9 months ago

Hi

Sure you can.


You have to define it as registrer pool.

Here you have an example.


voice register dn  1


number 2000


name Carlo-Jabber 2000



!


voice register pool  1


registration-timer max 720 min 660


id mac 1234.5678.0987


session-transport tcp


type Jabber-Android


number 1 dn 1


username carlo password cisco


codec g711ulaw





HTH


Regards


Carlo




Please rate all helpful posts

"The more you help the more you learn"

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Correct Answer
Carlo Poggiarelli Fri, 10/25/2013 - 05:31
User Badges:
  • Green, 3000 points or more

Hi

Sure you can.


You have to define it as registrer pool.

Here you have an example.


voice register dn  1


number 2000


name Carlo-Jabber 2000



!


voice register pool  1


registration-timer max 720 min 660


id mac 1234.5678.0987


session-transport tcp


type Jabber-Android


number 1 dn 1


username carlo password cisco


codec g711ulaw





HTH


Regards


Carlo




Please rate all helpful posts

"The more you help the more you learn"

Correct Answer
islam.kamal Fri, 10/25/2013 - 06:14
User Badges:
  • Red, 2250 points or more

Hi


In addition to the professional configuration of Mr/Carlo , Please also find the below document which shows you that V8.6 support jabber + required configuration.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1063949


Thank you

Please rate all useful information

lgrusila avain Fri, 10/25/2013 - 06:23
User Badges:

Carlo and Islam


Thank you so much


What about UC540 .Its the same philosophy as the above right?

What about if in the type : the cisco jabber is not available and is available only the CiscoMobile-iOS

We have to upgrade the ios  right?

Correct Answer
Carlo Poggiarelli Fri, 10/25/2013 - 06:37
User Badges:
  • Green, 3000 points or more

Hi.

Iphone is the only mobile phone supported by UC5XX because of the release of CME they run.

https://supportforums.cisco.com/docs/DOC-9827


CiscoMobile-iOS is the right device type



HTH


Regards


Carlo






Please rate all helpful posts

"The more you help the more you learn"

Carlo Poggiarelli Fri, 10/25/2013 - 07:10
User Badges:
  • Green, 3000 points or more

Hi.

For the roadmap I posted above, it seems so



Regards


Carlo



Please rate all helpful posts

"The more you help the more you learn"

lgrusila avain Fri, 10/25/2013 - 07:18
User Badges:

Ok clear


From the config i dont see also any other device type for example sip device type for any other sip application

So assume that is not supported also any other sip application

islam.kamal Fri, 10/25/2013 - 07:24
User Badges:
  • Red, 2250 points or more

Hi


For above configuration of type Jabber-Android.  Here we specify the sip client type. It can either be CiscoMobile-iOS for Apple iPhone users or Jabber-Android for Android users




Thank you

Please rate all useful information

lgrusila avain Fri, 10/25/2013 - 07:41
User Badges:

iSLAM


Is available only the CiscoMobile-iOS for our device so for android is not any option

That is clear


What i am wondering if we could use other application than jabber with sip profile configuration

but as i see is not any option for sip device except teh default for jabber (either iphone or android)

islam.kamal Fri, 10/25/2013 - 07:49
User Badges:
  • Red, 2250 points or more

Hi


ohhh , so under type there is no jabber-android. How can if you use CME v8.6 , this will not work if you assign sip application , should mention on type jabber-android.you can try , and i will search for you about files for jabber should be on your flash , to enable jabber-android.



Thank you

Please rate all useful infromation

islam.kamal Fri, 10/25/2013 - 07:53
User Badges:
  • Red, 2250 points or more

Hi


I think jabber-android only availble on V9 , but i will search about v8.6


Thank you

Please rate all useful information

Actions

This Discussion