Customer want me to defined a SPAN port on N2K, it is a fex port. when I configure I got the following statement from the switch.
Is there any way to solve the problem?
n5k-N2K(config-monitor)# destination ?
interface Configure interfaces
n5k-N2K(config-monitor)# destination interface eth102/1/18
ERROR: Eth102/1/18: Configuration not allowed on fex interface
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
BIOS: version 1.2.0
loader: version N/A
kickstart: version 4.0(1a)N2(1)
system: version 4.0(1a)N2(1)
BIOS compile time: 06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.0.1a.N2.1.bin
kickstart compile time: 2/25/2009 0:00:00 [02/25/2009 08:29:12]
system image file is: bootflash:/n5000-uk188.8.131.52a.N2.1.bin
system compile time: 2/25/2009 0:00:00 [02/25/2009 08:56:57]