Solved: mDNS cannot be configured when FlexConnect Local Switching is enabled

jlhainy · ‎10-25-2013

I am running Cisco Prime Infrastructu tore 1.3 and I am trying to push a template to allow flexconect local switching on a wlan. However, when I attempt this, I get the message "mDNS cannot be configured when FlexConnect Local Switching is enabled" and I cannot save the template or apply it to controllers. My controllers are WISM 2s running 7.0.235.3.

Jacob Snyder · ‎10-27-2013

Make sure you uncheck the mDNS option on the advanced tab of the WLAN template. You cannot use mDNS in conjunction with Flexconnect locally switched WLANs.

Sent from Cisco Technical Support iPhone App

View solution in original post

Jacob Snyder · ‎10-27-2013

Make sure you uncheck the mDNS option on the advanced tab of the WLAN template. You cannot use mDNS in conjunction with Flexconnect locally switched WLANs.

Sent from Cisco Technical Support iPhone App

jlhainy · ‎10-27-2013

hehehe. I guess I should have scrolled down. I couldn't see the setting. I'm good. thanks.