10-29-2013 04:59 AM - edited 03-16-2019 08:07 PM
Running - :c2800nm-advipservicesk9-mz.151-4.M4.bin
Show voice-port summary
0/2/0 -- fxs-ls up up off-hook idle y
0/2/1 -- fxs-ls up up off-hook idle y
0/2/2 -- fxs-ls up up off-hook idle y
0/2/3 -- fxs-ls up up off-hook idle y
show voice-call summary
0/2/0 - - - FXSLS_PARK
0/2/1 - - - FXSLS_PARK
0/2/2 - - - FXSLS_PARK
0/2/3 - - - FXSLS_PARK
when I - shut and no shut a port I see - 9 of these messages ..
Oct 29 15:54:43.154 : Miscellaneous signaling debug data: (ch=1):
0000 0080 ABBA **
I have disconnected all the cables from the card and tried just one port with a POTS handset - no joy
Cant make or recieve calls.
Please note there is a card is slot 3 - VIC2-2FXS - this is working perfectly.
Any ideas ??
Thanks
James
10-29-2013 07:10 AM
Please post the following information:
-show run
-show version
-show diag
-show voice dsp group all
-show voice dsp detail
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
10-29-2013 07:23 AM
Show Diag :
WIC Slot 2:
FXS Voice daughter card (4 port)
Hardware Revision : 3.1
Part Number : 73-6918-02
Board Revision : F0
Deviation Number : 0
Fab Version : 02
PCB Serial Number : FOC13223SDG
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-17016-02
Connector Type : 01
CLEI Code : IP9IABYCAA
Product (FRU) Number : VIC-4FXS/DID=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 3A 41 03 01 82 49 1B 06 02 42 46 30
0x10: 88 00 00 00 00 02 02 C1 8B 46 4F 43 31 33 32 32
0x20: 33 53 44 47 03 00 81 00 00 00 00 04 00 C0 46 03
0x30: 20 00 42 78 02 05 01 C6 8A 49 50 39 49 41 42 59
0x40: 43 41 41 FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
show voice dsp group all
DSP groups on slot 0:
dsp 1:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 16
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 16
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 2:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 16
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 16
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 3:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 1
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 1
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 4:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 5:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 6:
State: UP, firmware: 28.3.5
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 30
Codec: CONF_G711, maximum participants: 8
Sessions per dsp: 8
DSP groups on slot 1:
This command is not applicable to slot 1
DSP groups on slot 2:
This command is not applicable to slot 2
0 DSP resource allocation failure
show voice dsp detailed
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ========== ===== ======= === == ========= == ===== ============
edsp 0001 01 g711ulaw 0.1 IDLE 50/0/11.1
edsp 0002 02 g729r8 p 0.1 IDLE 50/0/11.2
edsp 0003 01 g711ulaw 0.1 IDLE 50/0/12.1
edsp 0004 02 g729r8 p 0.1 IDLE 50/0/12.2
edsp 0005 01 g711ulaw 0.1 IDLE 50/0/13.1
edsp 0006 02 g729r8 p 0.1 IDLE 50/0/13.2
edsp 0007 01 g711ulaw 0.1 IDLE 50/0/14.1
edsp 0008 02 g729r8 p 0.1 IDLE 50/0/14.2
edsp 0009 01 g711ulaw 0.1 IDLE 50/0/15.1
edsp 0010 02 g711ulaw 0.1 IDLE 50/0/15.2
edsp 0011 01 g729r8 p 0.1 IDLE 50/0/16.1
edsp 0012 02 g729r8 p 0.1 IDLE 50/0/16.2
edsp 0013 01 g711ulaw 0.1 IDLE 50/0/20.1
edsp 0014 02 g729r8 p 0.1 IDLE 50/0/20.2
edsp 0015 01 g729r8 p 0.1 IDLE 50/0/21.1
edsp 0016 02 g729r8 p 0.1 IDLE 50/0/21.2
edsp 0017 01 g729r8 p 0.1 IDLE 50/0/30.1
edsp 0018 01 g729r8 p 0.1 IDLE 50/0/31.1
edsp 0019 01 g729r8 p 0.1 IDLE 50/0/32.1
edsp 0020 01 g729r8 p 0.1 IDLE 50/0/33.1
edsp 0021 02 g729r8 p 0.1 IDLE 50/0/33.2
edsp 0022 01 g729r8 p 0.1 IDLE 50/0/34.1
edsp 0023 02 g729r8 p 0.1 IDLE 50/0/34.2
edsp 0024 01 g729r8 p 0.1 IDLE 50/0/35.1
edsp 0025 02 g729r8 p 0.1 IDLE 50/0/35.2
edsp 0026 01 g729r8 p 0.1 IDLE 50/0/36.1
edsp 0027 02 g729r8 p 0.1 IDLE 50/0/36.2
edsp 0028 01 g729r8 p 0.1 IDLE 50/0/38.1
edsp 0029 01 g729r8 p 0.1 IDLE 50/0/39.1
----------------------------FLEX VOICE CARD 0 -----------------------
-------
*DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND : (bad)bad (shut)shutdown (dpend)download pending
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 02 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 03 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 04 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 05 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 06 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 07 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 08 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 09 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 10 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 11 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 12 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 13 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 14 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 15 None 28.3.5 idle idle 1 1 0 0/0
C5510 001 16 None 28.3.5 idle idle 1 1 0 0/0
C5510 002 01 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 02 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 03 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 04 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 05 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 06 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 07 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 08 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 09 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 10 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 11 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 12 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 13 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 14 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 15 None 28.3.5 idle idle 0 0 0 0/0
C5510 002 16 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 01 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 02 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 03 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 04 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 05 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 06 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 07 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 08 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 09 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 10 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 11 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 12 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 13 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 14 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 15 None 28.3.5 idle idle 0 0 0 0/0
C5510 003 16 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 01 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 02 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 03 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 04 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 05 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 06 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 07 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 08 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 09 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 10 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 11 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 12 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 13 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 14 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 15 None 28.3.5 idle idle 0 0 0 0/0
C5510 004 16 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 01 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 02 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 03 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 04 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 05 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 06 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 07 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 08 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 09 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 10 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 11 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 12 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 13 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 14 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 15 None 28.3.5 idle idle 0 0 0 0/0
C5510 005 16 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 01 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 02 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 03 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 04 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 05 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 06 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 07 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 08 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 09 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 10 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 11 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 12 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 13 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 14 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 15 None 28.3.5 idle idle 0 0 0 0/0
C5510 006 16 None 28.3.5 idle idle 0 0 0 0/0
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 {flex} 28.3.5 alloc idle 1 1 0/2/1 06 0 49/0
C5510 001 02 {flex} 28.3.5 alloc idle 1 1 0/2/0 06 0 131/0
C5510 001 03 {flex} 28.3.5 alloc idle 1 1 0/2/3 02 0 69/0
C5510 001 04 {flex} 28.3.5 alloc idle 1 1 0/2/2 02 0 53/0
C5510 001 05 {flex} 28.3.5 alloc idle 1 1 0/3/0 02 0 58/0
C5510 001 06 {flex} 28.3.5 alloc idle 1 1 0/3/1 02 0 53/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
Some Running Config
network-clock-participate wic 0
network-clock-participate wic 1
!!
multilink bundle-name authenticated
!
isdn switch-type primary-net5
!!!
voice service voip
no ip address trusted authenticate
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
h225 timeout setup 2
call start slow
!
voice class codec 353
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g728
codec preference 4 g711alaw
codec preference 5 g711ulaw
codec preference 6 g726r32
codec preference 7 g726r24
codec preference 8 g726r16
codec preference 9 g723r63
codec preference 10 g723ar63
!
voice class h323 353
h225 timeout setup 2
!!
voice-card 0
dspfarm
dsp services dspfarm
!
!
voice-port 0/0/0:15
!
voice-port 0/1/0:15
!
voice-port 0/2/0
no vad
no comfort-noise
cptone RU
caller-id enable
!
voice-port 0/2/1
no vad
no comfort-noise
caller-id enable
!
voice-port 0/2/2
no vad
no comfort-noise
caller-id enable
!
voice-port 0/2/3
no vad
no comfort-noise
caller-id enable
!
voice-port 0/3/0
no vad
no comfort-noise
caller-id enable
!
voice-port 0/3/1
no vad
no comfort-noise
caller-id enable
!
no ccm-manager fax protocol cisco
!
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
!
mgcp profile default
!
sccp local FastEthernet0/1
sccp ccm 10.82.10.1 identifier 1 version 4.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODER
associate profile 2 register XCONFERENCE
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 1
associate application SCCP
shutdown
!
dspfarm profile 2 conference
codec g711ulaw
codec g711alaw
maximum sessions 1
associate application SCCP
!!
!
dial-peer voice XXXXXX2 pots
destination-pattern XX2
fax rate disable
port 0/2/0
!
dial-peer voice XXXXXX3 pots
destination-pattern XX3
fax rate disable
port 0/2/1
!
dial-peer voice XXXXXX4 pots
destination-pattern XX4
fax rate disable
port 0/2/2
!
dial-peer voice XXXXXX5 pots
destination-pattern XX5
fax rate disable
port 0/2/3
!
dial-peer voice XXXXXX6 pots
destination-pattern XX6
fax rate disable
port 0/3/0
!
dial-peer voice XXXXXX7 pots
destination-pattern XX7
fax rate disable
port 0/3/1
!!
!
telephony-service
sdspfarm units 2
sdspfarm transcode sessions 2
sdspfarm unregister force
sdspfarm tag 1 XCODER
sdspfarm tag 2 XCONFERENCE
conference hardware
network-clock-participate wic 0
network-clock-participate wic 1
!!
multilink bundle-name authenticated
!
isdn switch-type primary-net5
!!!
voice service voip
no ip address trusted authenticate
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
h225 timeout setup 2
call start slow
!
voice class codec 353
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g728
codec preference 4 g711alaw
codec preference 5 g711ulaw
codec preference 6 g726r32
codec preference 7 g726r24
codec preference 8 g726r16
codec preference 9 g723r63
codec preference 10 g723ar63
!
voice class h323 353
h225 timeout setup 2
!!
voice-card 0
dspfarm
dsp services dspfarm
!
!
voice-port 0/0/0:15
!
voice-port 0/1/0:15
!
voice-port 0/2/0
no vad
no comfort-noise
cptone RU
caller-id enable
!
voice-port 0/2/1
no vad
no comfort-noise
caller-id enable
!
voice-port 0/2/2
no vad
no comfort-noise
caller-id enable
!
voice-port 0/2/3
no vad
no comfort-noise
caller-id enable
!
voice-port 0/3/0
no vad
no comfort-noise
caller-id enable
!
voice-port 0/3/1
no vad
no comfort-noise
caller-id enable
!
no ccm-manager fax protocol cisco
!
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
!
mgcp profile default
!
sccp local FastEthernet0/1
sccp ccm 10.82.10.1 identifier 1 version 4.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODER
associate profile 2 register XCONFERENCE
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 1
associate application SCCP
shutdown
!
dspfarm profile 2 conference
codec g711ulaw
codec g711alaw
maximum sessions 1
associate application SCCP
!!
!
dial-peer voice XXXXXX2 pots
destination-pattern XX2
fax rate disable
port 0/2/0
!
dial-peer voice XXXXXX3 pots
destination-pattern XX3
fax rate disable
port 0/2/1
!
dial-peer voice XXXXXX4 pots
destination-pattern XX4
fax rate disable
port 0/2/2
!
dial-peer voice XXXXXX5 pots
destination-pattern XX5
fax rate disable
port 0/2/3
!
dial-peer voice XXXXXX6 pots
destination-pattern XX6
fax rate disable
port 0/3/0
!
dial-peer voice XXXXXX7 pots
destination-pattern XX7
fax rate disable
port 0/3/1
!!
!
telephony-service
sdspfarm units 2
sdspfarm transcode sessions 2
sdspfarm unregister force
sdspfarm tag 1 XCODER
sdspfarm tag 2 XCONFERENCE
conference hardware
If you need anymore info - let me know
10-29-2013 07:42 AM
Did you try a reseat of the card?
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
10-29-2013 09:27 PM
Hi James,
When u connect Analog Handset on the either of the FXS ports of card, does any LED glow on card.
regds,
aman
11-11-2013 02:16 AM
Jorge,
You ask for all the configs ..
and then ask - did you reseat the card - thats not helpful at all.
Last time I post my config on here !
I am in the process of replacing the card.
11-18-2013 03:23 AM
Guys,
Just to let you know the solution here. I replaced the card with a new VIC3-4FXS card - the new card worked fine.
So this was a hardware fault.
Regards
James
11-18-2013 06:29 AM
thanks for update.
regds,
aman
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: