×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

3800 Router: Adding an SFP Module ...

Answered Question
Oct 29th, 2013
User Badges:

Hi-

I'm looking to add an SFP module for our 3825 router.  Initially, I was going to procure the following items:


HWIC-1GE-SFP

GLC-LH-SMD:    MMF and SMF, 1300-nm wavelength, dual LC/PC connector


... but found out that the HWIC-1GE-SFP is 'end of sale'. 


I searched online and I think the new part is EHWIC-1GE-SFP-CU.  The Cisco page says that it's supported on the 2900 and the 3900 series, but I didn't see anything for the 3800. 


Can anyone confirm that the EHWIC-1GE-SFP-CU module is supported on a 3800?



Many Thanks!

Correct Answer by paolo bevilacqua about 3 years 9 months ago

As the data sheet specifies, it is not supported on old routers.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Tue, 10/29/2013 - 07:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

As the data sheet specifies, it is not supported on old routers.

paolo bevilacqua Wed, 10/30/2013 - 09:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Thank you for the nice rating and good luck!

Actions

This Discussion