×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Int f0/0 and f0/1 networks cannot communicate. reason?

Unanswered Question
Oct 30th, 2013
User Badges:

Hi,


I have tow networks on my two router interfaces i.e on f0/0 and f0/1. I can ping from pc to the other network pc but canot ping the other network switch nor both switches can ping eachother. I cannot understand why. plz help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
John Blakley Wed, 10/30/2013 - 12:53
User Badges:
  • Purple, 4500 points or more

Do you have any acls or firewalls in between the two networks?



HTH,
John

*** Please rate all useful posts ***

JohnTylerPearce Wed, 10/30/2013 - 13:37
User Badges:
  • Silver, 250 points or more

Can you post the configuration of both interfaces? Also if these are windows machines, is it possibe to turn the firewall off and test again?

harris_732 Fri, 11/01/2013 - 04:03
User Badges:

No, I don't have any acls or firewalls in between the two networks.

prajithtr_2 Thu, 10/31/2013 - 02:17
User Badges:

Does the manage IPs of switches adverise properly in the router and could you check the default gateway in the switches configured properly..


Kindly post the configurations



*** Please rate all useful posts ***

harris_732 Fri, 11/01/2013 - 04:18
User Badges:

Yes I have checked and the default gateway was not configured on the switches. now its working . Thanks Alot to everybody here who responded to my query.

Miguel Angel Bustos Thu, 10/31/2013 - 03:39
User Badges:

The IP's are in the same network? The gateway's are of both switches are configure correctly?

harris_732 Fri, 11/01/2013 - 04:19
User Badges:

Yes the gateway was not configured, now its working. Thanks alot

Actions

This Discussion

Related Content