11-06-2013 07:18 AM - edited 07-04-2021 01:13 AM
Hi everyone :
I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.
Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?
Regards,
Claudio L.
Solved! Go to Solution.
11-06-2013 07:20 AM
Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.
Sent from Cisco Technical Support iPhone App
11-06-2013 07:20 AM
Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.
Sent from Cisco Technical Support iPhone App
11-06-2013 07:34 AM
Hi Scoott,
Thank you so much for your response.
I have used this guide to configure this deployment :
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
In win 2008 server , I just only add the WLC like a new Radius Client ?
I mean ,
Frienly Name : WLC2
Address IP : 192.168.1.X
Vendor : Radius Standard
Share secret : xxxx
And That´s all, right ?
11-06-2013 07:39 AM
That is correct.
Sent from Cisco Technical Support iPhone App
11-06-2013 06:17 PM
Thank you so much !!!
Sent from Cisco Technical Support iPad App
11-06-2013 07:24 PM
No problem:)
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide