11-06-2013 07:18 AM - edited 07-04-2021 01:13 AM
Hi everyone :
I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.
Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?
Regards,
Claudio L.
Solved! Go to Solution.
11-06-2013 07:20 AM
Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.
Sent from Cisco Technical Support iPhone App
11-06-2013 07:20 AM
Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.
Sent from Cisco Technical Support iPhone App
11-06-2013 07:34 AM
Hi Scoott,
Thank you so much for your response.
I have used this guide to configure this deployment :
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
In win 2008 server , I just only add the WLC like a new Radius Client ?
I mean ,
Frienly Name : WLC2
Address IP : 192.168.1.X
Vendor : Radius Standard
Share secret : xxxx
And That´s all, right ?
11-06-2013 07:39 AM
That is correct.
Sent from Cisco Technical Support iPhone App
11-06-2013 06:17 PM
Thank you so much !!!
Sent from Cisco Technical Support iPad App
11-06-2013 07:24 PM
No problem:)
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: