Configuring Range in Network Object with ASA 5505

Unanswered Question
Nov 7th, 2013
User Badges:

Hi Team

I have a firewall ASA 5505, with the version 8.2 and ADSM 6.4, i need configure range in network object, but only appears the IP address option and not more options. I send the print screen. I need update the version of ASA and ADSM?

Thank you.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jouni Forss Thu, 11/07/2013 - 14:58
User Badges:
  • Super Bronze, 10000 points or more


The configuration "object network " is only available from software level 8.3 (and newer)

The 8.2 and older softwares only have "object-group network "

The "object network " can contain "host" , "subnet" or "range"

The "object-group network " can contain "network-object host " or "network-object "

So to my understanding there is no real option to specify a range of IP addresses in your software.

Option would be use to use multiple IP addresses under the same "object-group" or configuration small subnets under the "object-group" that match the address range needed.

- Jouni


This Discussion