×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ISDN PRI telco settings for UC500

Unanswered Question
Nov 8th, 2013
User Badges:

Our telco (Virgin Media Business, UK) have asked for some information about the PBX (UC540) in order to correctly configure ISDN PRI (E1 - ISDN30) at their end. We have a VWIC2-1MFT-T1/E1 voice interface card installed in the UC.


Specifically they want to know three things: Signalling Protocol, Outbound CLI, DDI Digit Presentation -- but I'm not sure what these mean and which settings would work with the UC540.


Any assistance appreciated.


Thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
johschaf Fri, 11/08/2013 - 10:12
User Badges:
  • Silver, 250 points or more

Hello,


Supported signaling protocols with an E1 are:


4ESS

5ESS

DMS100

DNPSS

NET5

NI(includes NI-2)

NTT

QSIG


This, Outbound CLI, sounds  like Outbound Caller ID. I'm not sure if this refers to the name or  number. We can control the caller ID number, and they will be  responsbile for the caller ID name.


DDI Digit  Presentation, is how many digits they present to us on a call on the  called number. We can support variable DDI lengths, usually it is best  for management purposes to just have them send the full DDI.


Hope this helps.


Thanks,


-john

Actions

This Discussion

Related Content