×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

cisco 3845, h323-isdn pri, reverese caller id

Unanswered Question

Hello!


I run mixed voip network, with several h323-isdn pri gateways.

Some of these gateways are cisco, some asterisk.


I configured one of asterisk gateways according to

http://www.voip-info.org/wiki/view/Asterisk+func+CONNECTEDLINE


so if I do call in following scheme:


PBX1--pri--asterisk1--h323--asterisk2--pri--PBX2


once PBX1 user accept call user on PBX receives user's name from PBX1.


but if I do call in

PBX1--pri--asterisk1--h323--cisco3845--pri--PBX2


There is no user name.


Asterisk sends name as informational element, I see it in traffic dump.


What I need to configure on cisco , so it will transfer this element to PBX2?


Thank you!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion