×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RV042G router DMZ port configuration

Unanswered Question
Nov 14th, 2013
User Badges:

Hi,

I try to configure my new router RV042G to substitute the existing old linux server for my organization, but I have blocked to configuration of DMZ port. The desired configuration what I want to implement is:
WAN port configured with IP static address:
IPAddress: 82.77.193.178, M: 255.255.255.224, G: 82.77.193.161, and DNS: 213.154.124.1.

My ISP give my a real address range: 81.196.168.177-81.196.168.190. I enable DMZ port of RV04G router and I set subnet to 81.196.168.177 with 255.255.255.240 mask. To the DMZ port I connect a switch with all my servers.
The main ideea is that my ISP will route the range 81.196.168.177-81.196.168.190 to the internet on his own servers.

Temporarly I put the router Firewal down.   

The problem is that I can't access the internet from my servers.

The LAN network work fine.

Best Regards,

Dorin Popa              

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content