SG200-26P Boot version upgrade

Answered Question
Nov 18th, 2013
User Badges:

Hi,


I've just upgraded a new SG-200-26P to firmware 1.3.5.58 and language version to 1.3.5.58.

Boot version is still in 1.1.0.6 (file size : 393,232 octets)


I've got the sx200_boot-13506.rfb but none of Firmware Image & Language File accept this file in the Upgrade/Backup Firmware/Language section.

Message :

Copy : Illegal software format

or

Copy : not a localization file format.


What should I do ?


Thanks,


Vincent

Correct Answer by viningele about 3 years 9 months ago

Check out this thread:

https://supportforums.cisco.com/message/4054032#4054032

FYI, I did this last night using the TFTP version of SolarWinds server.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Tom Watts Mon, 11/18/2013 - 13:11
User Badges:
  • Green, 3000 points or more

Hi Vincent, there is a boot rfb file within the zip when you downloaded the firmware.


sx200_boot-13506.rfb

You need to load the boot to load the firmware.



-Tom
Please mark answered for helpful posts

Vincent Duvernet Tue, 11/19/2013 - 00:39
User Badges:

Hi.


so, how can we upgrade the boot  contained in the ZIP file ? I've succeed the firmware to 1.3.5.58 but not the boot to 1.3.5.06

Vincent Duvernet Tue, 11/19/2013 - 04:27
User Badges:

Great. it works perfectly.


(grrr the latest firmware still not let opssibility to store switch login & password...)

Actions

This Discussion