I upgraded VSM from Nexus1000v.4.2.1.SV2.1.1a to Nexus1000v.4.2.1.SV2.2.1a.
Then I upgraded VEM,I got Dependency Error.So I have to upgrade ESXi to 5.5 in order to upgrade VEM to Nexus1000v.4.2.1.SV2.2.1a?
If I keep VEM on 1.1a on ESXi 5.1.0 host.
Execute VEM upgrade on n1000v command set
Then I add another ESXi5.5 host with VEM 2.1a.
Can the two different VEM version work fine on VSM 2.1a?
current version:VMware ESXi 5.1.0 build-1157734
following is the command I executed,
VEM upgrade on n1000v command set
vmware vem upgrade notify
show vmware vem upgrade status
show vmware vem upgrade status
Upgrade Bundle ID:
VSM: VEM500-201309162100-BG
DVS: VEM410-201301152101-BG
vmware vem upgrade proceed
show vmware vem upgrade status
Upgrade Bundle ID:
VSM: VEM500-201309162100-BG
DVS: VEM500-201309162100-BG
on ESXi
cp /vmfs/volumes/fas2040/upgrade/cross_cisco-vem-v162-4.2.1.2.2.1a.0-3.2.1.vib /var/log/vmware/
esxcli software vib install -v /var/log/vmware/cross_cisco-vem-v162-4.2.1.2.2.1a.0-3.2.1.vib
[DependencyError]
VIB Cisco_bootbank_cisco-vem-v162-esx_4.2.1.2.2.1a.0-3.2.1 requires esx-base = 5.5.0, but the requirement cannot be satisfied within the ImageProfile.
Please refer to the log file for more details.
