×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco Pix 501 Bricked?

Answered Question
Nov 19th, 2013
User Badges:

Hi,

I bought this PIX 501 on second hand market for 5 pound, good bargain.

But it seems that doesn't boot. The leds are blinking as show the video.

I can't acces via ethernet, I didn't try by console cable.

I replaced the internal lithium battery BR2032 for a new one.

It is bricked? What can I do?

https://www.youtube.com/watch?v=4B6-hsvO3S4


Correct Answer by jumora about 3 years 8 months ago

If it get´s to the count down then you should be able to break but if not.....dead


Value our effort and rate the assistance!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
jumora Tue, 11/19/2013 - 14:03
User Badges:
  • Cisco Employee,

If you cannot get into ROMMON or monitor mode through the console then your device is dead.

Josep Maria Ber... Tue, 11/26/2013 - 05:18
User Badges:

Hi Jumora,

Many thanks for your help.


Finally I had access via console cable but the device looks like is restarting continously.

Correct Answer
jumora Tue, 11/26/2013 - 05:59
User Badges:
  • Cisco Employee,

If it get´s to the count down then you should be able to break but if not.....dead


Value our effort and rate the assistance!

Actions

This Discussion