11-19-2013 05:24 AM - edited 03-11-2019 08:06 PM
Hi,
I bought this PIX 501 on second hand market for 5 pound, good bargain.
But it seems that doesn't boot. The leds are blinking as show the video.
I can't acces via ethernet, I didn't try by console cable.
I replaced the internal lithium battery BR2032 for a new one.
It is bricked? What can I do?
https://www.youtube.com/watch?v=4B6-hsvO3S4
Solved! Go to Solution.
11-26-2013 05:59 AM
If it get´s to the count down then you should be able to break but if not.....dead
Value our effort and rate the assistance!
11-19-2013 02:03 PM
If you cannot get into ROMMON or monitor mode through the console then your device is dead.
11-26-2013 05:18 AM
Hi Jumora,
Many thanks for your help.
Finally I had access via console cable but the device looks like is restarting continously.
11-26-2013 05:59 AM
If it get´s to the count down then you should be able to break but if not.....dead
Value our effort and rate the assistance!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: