11-22-2013 12:43 AM - edited 07-04-2021 01:18 AM
Hi, I'm new to this device and need to setup a wireless environment for our office using Cisco 2100 WLAN controller. Trying to browse over its GUI to heck where shall I input the settings for it to authenticate with our Windows Server using IAS that supports RADIUS? Appreciate any help on this.
Thanks in advance
Jeff
Solved! Go to Solution.
11-22-2013 01:18 AM
HI JEFF,
use this link for help.
http://www.cisco.com/en/US/products/ps7206/prod_configuration_examples_list.html
Nice step to step guide here:
Regards
Don't forget to rate helpful posts.
11-22-2013 01:18 AM
HI JEFF,
use this link for help.
http://www.cisco.com/en/US/products/ps7206/prod_configuration_examples_list.html
Nice step to step guide here:
Regards
Don't forget to rate helpful posts.
11-24-2013 07:31 PM
Hi, this is indeed helpful for me, will try this and giv you feedback if I'm successful, really appreciate this.
Thanks
Jeff
11-24-2013 10:16 PM
Hi Sandeep,
I'm already on the part where you will need to add a vlan for the WLAN my next issue is since this is a task that was initially configured but was not completed, how will I know the existing vlan that was previously created for WLAN, I've confirmed with my manager that a vlan was created for this wlan but was not completed by the vendor, How will i know this vlan?
Thanks
Jeff
11-24-2013 11:07 PM
Hi Jeff ,
Do have GUI access to WLC??
If u have then go to Controller>interface and check which interface is assigned to WLAN.
Or check from here :
WLAN > WLAN id open this and check which WLAN have which interface .
Regards
Don't forget to rate helpful posts
Sent from Cisco Technical Support iPhone App
11-25-2013 12:09 AM
Yes I do have GUI access, actually I was already successful in the part of creating a vlan for the WLAN, when I tried to perform the vlan creation, it said that I was overlapping with another vlan, when I show ip route saw the vlan that was created before and confirmed with my manager if that was the one created by the vendor, and indeed this was the vlan.
My next issue is, after installing IAS, was trying to request a certificate for the member server (IAS) but got this error message:
Thanks
Jeff
11-25-2013 01:04 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: