Solved: How to shutdown vlan in layer2

chandra_rc16 · ‎11-25-2013

How to shutdown vlan in layer2 ? Thanks in advance.

I've done it using "shutdown" command. but still it is showing active in "show vlan".

switch0(config)#interface vlan 2
switch0(config-if)#
%LINK-5-CHANGED: Interface Vlan2, changed state to up

switch0(config-if)#shutdown

%LINK-5-CHANGED: Interface Vlan2, changed state to administratively down

switch0(config-if)#end
switch0#
%SYS-5-CONFIG_I: Configured from console by console

---------------------------

switch0#show vlan brief

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

Gig1/1, Gig1/2

2 VLAN0002 active

Regards,

Chandu

Regards, Chandu

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

vlan 100, shutdown, and interface vlan 100, shutdown

Shutting down the interface vlan 2 disables the Layer 3 interface for that VLAN on the switch. This means hosts will still be able to communicate WITHIN the VLAN (Layer 2) but can not be routed off of the subnet.

Shutting down the VLAN (vlan 2) disables Layer 2 switching of that VLAN on the switch. This will effectively turn off all layer 2 switching on the VLAN (preventing all communication).

Regards

Dont forget to rate helpful posts.

View solution in original post

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

Are you using PT ????

PT dont have this command.

Thanks

View solution in original post

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

PT is more then enough for CCNA.

Dont worry just study the basic conecpts and do some lab practice on PT.

If you need any more labs then just PM me.

Regards

View solution in original post

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

vlan 100, shutdown, and interface vlan 100, shutdown

Shutting down the interface vlan 2 disables the Layer 3 interface for that VLAN on the switch. This means hosts will still be able to communicate WITHIN the VLAN (Layer 2) but can not be routed off of the subnet.

Shutting down the VLAN (vlan 2) disables Layer 2 switching of that VLAN on the switch. This will effectively turn off all layer 2 switching on the VLAN (preventing all communication).

Regards

Dont forget to rate helpful posts.

chandra_rc16 · ‎11-25-2013

Sandeep,

I'm not seeing the any options here.

switch0(config)#vlan 2 ?

Regards,

Chandu

Regards, Chandu

Sandeep Choudhary · ‎11-25-2013

Hi chandu,

Config t
Vlan 2
Shut

Regards

Sent from Cisco Technical Support iPhone App

chandra_rc16 · ‎11-25-2013

Still.

switch0(config)#vlan 2

switch0(config-vlan)#?

VLAN configuration commands:

exit Apply changes, bump revision number, and exit mode

name Ascii name of the VLAN

no Negate a command or set its defaults

switch0(config-vlan)#

Regards, Chandu

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

Are you using PT ????

PT dont have this command.

Thanks

chandra_rc16 · ‎11-25-2013

Yes it's PT. Whenever i face this type situation na... then i'll doubt whether will PT help me to pass CCNA because it is not having these type of some basic commands..

And i can't get a real equipment...

Regards,

Chandu

Regards, Chandu

chandra_rc16 · ‎11-25-2013

Really sad...

But thanks for you help sandeep.

Regards, Chandu

Sandeep Choudhary · ‎11-25-2013

HI Chandu,

PT is more then enough for CCNA.

Dont worry just study the basic conecpts and do some lab practice on PT.

If you need any more labs then just PM me.

Regards

subhojithalder198 · ‎11-25-2013

HI,

Pls suspend the vlan

br/subhojit

chandra_rc16 · ‎11-26-2013

What is the command? Subhojit .

I think even that also will not be there in PT.

Regards, Chandu

Sandeep Choudhary · ‎11-26-2013

No vlan 2

state command not supported on PT.

Regards

Sent from Cisco Technical Support iPhone App

subhojithalder198 · ‎11-26-2013

HI,

# Config t

vlan 111

state suspend

Br/Subhojit

chandra_rc16 · ‎11-26-2013

Same dialog. Not there.

However thank you both.

Regards, Chandu

chandra_rc16 · ‎11-26-2013

Thanks sandeep.

Regards,

Chandu

Regards, Chandu