×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VSS different chassis

Answered Question
Nov 26th, 2013
User Badges:

Hi all. Is it posiible to make VSS with chassis Cat 4507R+E and Cat 4507R-E with the same supervisors and same linecards?

Correct Answer by Jon Marshall about 3 years 8 months ago

From the 4500 configuration guide -


Chassis

  2

VSS is available on a Catalyst 4500-X switch and on chassis that support Supervisor Engine 7-E and Supervisor Engine 7-LE.

Note The two chassis must have the same number of slots. However, +E and -E chassis can be mixed.


full link -


http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1053927


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jon Marshall Tue, 11/26/2013 - 06:10
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

From the 4500 configuration guide -


Chassis

  2

VSS is available on a Catalyst 4500-X switch and on chassis that support Supervisor Engine 7-E and Supervisor Engine 7-LE.

Note The two chassis must have the same number of slots. However, +E and -E chassis can be mixed.


full link -


http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1053927


Jon

Hai Dao Tuan Sun, 02/19/2017 - 02:53
User Badges:

Hi

How about Supervisor 8E and Supervisor 7E or 8L-E. As last time we bought 1x 4503-E with Sup8E, this year we will buy 1 more for redundancy, but we want to reduce the cost, so we want to buy Sup7E or 8L-E. So I wonder if either Sup7E/Sup8L-E can do VSS with SUP-8E

Actions

This Discussion

Related Content